Epson error code 0x9a: Causes, Symptoms, and Solutions

Epson printers are considered one of the best versatile printers originating from japan. The printers are economical and easy to use as well as they are filled with the latest technology and designs which you can’t resist. But sometimes, due to flaws, the machine may show some errors like Epson printer error code 0x97. Below, we list some reasons that could answer your questions, like what error code 0x9a for Epson printer means and some possible troubleshooting techniques by which you can overcome this error.

Reasons and Causes behind Epson Printer error code 0x97

If your printer shows errors like Epson error code 0x9a below, we have provided reasons why one encounters such errors.

• The Epson printer 0x97 error is not a software issue but a hardware damage issue.
• Your Epson printer shows this error only if your internal components are compromised.
• This kind of error is usually associated with your motherboard.
• Or in some cases, the dust in your printer or jammed paper may too tend to cause such errors, so it is important to frequently clean your printer.
• Clogged nozzles are also responsible for such errors.

These were some reasons for which Epson error code 0x97 may occur in your device, so it is very important to clean your printer nozzles and wipe away any dust present in your system.

Common Symptoms behind Epson wf-3640 error code 0x97

Epson printers usually don’t show such errors like Epson wf-3640 error code 0x97 frequently, but it can be very frustrating once encountered.

Thompson wf-3640 error code 0x97 mostly occurs when you use the printer for a long period.

These errors don’t show any symptoms but show up surprisingly if you have used the device for a very long time.

It damages your printer by disrupting the signal that advises your printer for its on and off operations.

So, it is advised that one should frequently clean their printers with a wet cloth. Clean the nozzles and remove all the trapped dust as these could cause errors, which can be very frustrating.

Different Ways to Troubleshoot Epson error code 0x97 wf-3640

Below we have provided many methods by which you can troubleshoot your Epson error code 0x97 wf-3640.  Just follow the below steps and methods correctly to overcome such an error.

Disconnect everything:

• If you have any task running, select cancel.
• Take out all your jammed papers.
• Disconnect all the cables, including your cartridges
• Press and hold the power button for 1 minute.
• Conduct a test print
• Reinstall your cartridges.
• Push the power button and connect all the removed wires.
• Now connect to your device again and print.

Reset Your Printer

• Disconnect all your cable.
• Press hold the power button for 1 minute.
• Keep the button pressed while you connect the wire again.
• Press and hold the power button again for a minute and release.
• Conduct a test print to check whether your printer works properly or not.

Install Epson error code 0x97 fix patch:

Downloading the Epson error code 0x97is very simple and can help you resolve the error. Just follow the below steps, and you are good to print once again.

• Visits the Epson official website and download the 0x97 security fix patch.
• Install and press the scan button.
• It will list the error and then press the repair button to repair your printer when all is done.

And that’s it; you will get your printer working back to normal.

Microsoft printer troubleshooter

You can even use a Microsoft printer troubleshooter to address your Epson 0x97 error. Just follow the steps mentioned below.

• Visit the Microsoft support website.
• Look down for the Microsoft printer troubleshooter option
• You need to download the troubleshooter based on your Epson model.
• Install the tool on your system
• Follow the on-screen recommendations to clear your error.

Once cleared, you can have your printer out of such an error state.

Clean your print head

Sometimes dirty print heads obstruct and cause Epson printer error code 0x97. In such a case, follow the instructions below to know how to clean your print head.

• First, switch off your device.
• Remove the ink cartridges and place them carefully inverted position over a towel.
• Now carefully remove the print head.
• Clean the print head with a cloth dipped in warm water until the black color oozing disappears.
• Soak the print head into a bowl of warm water for some minutes. Make sure the water should not be hot at all.
• Take the print head and wipe it with a clean, dry cloth removing all the moisture build-up.
• Now dry it for 15 minutes.
• Install the print head and cartridges carefully and switch on the printer.

Update printer drivers

One of the most important reasons your Epson workforce wf-3640 printer shows an error is that you haven’t downloaded the latest driver software. Here are some ways by which you can download the latest Epson software for your printer and never let any error bother you.

• Visit the Epson support website.
• Go to the search bar and enter your model name. In our case, it is wf 3640 and click on search.
• In the new window, choose the operating system you want to install.
• Click on Go.
• A list of all the possible drivers and firmware updates shows up.
• Click on download.
• Now visit where you saved your driver download software and double click on it to install.
• Follow the on-screen instructions and click on the finish at the end.

And this is how you can install new drivers into your printer and drive away from the Epson error code 0x97just by following the steps mentioned above.

FREQUENTLY ASKED QUESTIONS

How do I get my Epson printer out of error mode?

Below are some common reasons why your Epson printer might show error issues, so check them first.

• Check all your connections properly, including wires and WIFI.
• Check whether your ink is full.
• Jammed paper may also cause such issues to remember to remove.

If the problem persists, it is better to check that you have an old driver to download a new driver.

• Visit the Epson website.
• Enter your products name
• Provide your operating system details
• Choose the suitable driver from the provided list and download it.
• Install the drivers and click on finish to end

These were some ways to get your printer out of error mode.

Why does my printer keep saying error printing?

This kind of error is usually due to loose-fitting connection wires or disconnected Wi-Fi connection with your computer device while printing.

How do I update the firmware on my Epson WF 3640?

Updating to the latest firmware for your Epson workforce wf-3640 is very easy. You need to follow the below-provided steps to get your job done.

• Visit the Epson Support Website.
• In the search, the option provides the details of your Epson model WF 3640.
• In the new webpage, download section, enter your operating system details to download the firmware.
• As of December 2021, a new firmware update is available for your printer.
• Click on download from the list where the latest firmware is available.
• Now double click on the downloaded firmware to install.