Download HP Envy 4500 Printer Driver And Wireless Setup manually

This HP Envy 4500 all-in-one wireless printer allows you to print from almost anywhere at a low cost. From your smart phone, tablet, or connected PC, creates borderless, lab-quality images and laser-sharp papers. Use the built-in wifi to print and share with notebooks or PCs on an existing wireless network. Connect to a current wireless network quickly and conveniently and send print jobs wirelessly, rapidly, and reliably. Read this blog to learn how to install your HP Envy 4500 printer and learn how to complete HP Envy 4500 wireless setup and driver download.

HP Envy 4500 Printer Manual

For uploading and updating HP Envy 4500 Ink and Driver, there are a few steps to follow. When the printer is properly calibrated, it is simple to use. Connecting the HP Envy 4500 Wireless Printer to your computer may be difficult. Manually downloading the HP Envy 4500 wireless printer settings requires some simple procedures.

This HP Envy 4500 all-in-one Printer Manual allows the user to set a printer properly in order to avoid user mistakes. The HP Envy 4500 handbook with wifi connectivity is now available for download on the HP website.

How to connect HP Envy 4500 Wireless Printer to computer?

To learn how to connect HP Envy 4500 wireless printer to computer, follow the steps given below for HP Envy 4500 printer setup wirelessly:

Unpack your HP printer and make sure to switch it on.
Press the wireless button on the control panel of your printer.
Go to the wireless settings menu and click on OK.
Setup wizard window will be displayed, press OK.
The available wifi networks in the area will be displayed once the printer is done searching the surroundings.
Select your desired wifi network from the list displayed.
Press OK after selecting your wireless network.
Enter the password for your wireless network.
A success message will be shown after the printer is connected, press OK.
Your wireless setup is complete

How to connect HP Envy 4500 Printer to Windows?

Follow the steps given below to connect your HP Envy 4500 wireless printer to wifi on a Windows desktop, make sure that the device and the printer are connected to the same network.

Make sure your Windows device and printing system are activated.
Download the HP Envy 4500 printer driver from the official website of HP or by using the CD.
Run the downloaded driver to complete the setup.
Go to the Windows menu search option and type “Control Panel.”
Once the control panel window is open, select the “Device and Printer” option.
Click on “Add Printer.”
Then, find your HP Envy printer from the list displayed.
Select Add a Wireless Printer Network.
Ensure that the WLAN feature is activated.
To start installing the driver, press next.
Once the driver is downloaded, you have to connect your printer to the open wireless network.
Make sure to connect to the same wireless network on your Windows device.
The wireless Windows HP Envy 4500 installation process is now complete.

How to connect HP Envy 4500 Printer on Mac ?

Follow the steps given below to connect your HP Envy 4500 Printer to wifi on Mac. Make sure that the printer and your Mac device are connected to the same network.

Ensure that your Mac and HP Envy printer are switched on.
Click on the Wireless Button on your printer control panel.
Choose the settings option.
Select the wireless settings button after clicking the icon.
Tap on the Wireless Setup Wizard and find your preferred wireless network.
Now, from the list of available networks displayed, find your desired wireless network.
Enter the password for your wireless network.
Wait till the connection is authenticated and verified.
Print out a test print page.

HP Envy 4500 Wireless Protected Setup:

follow the steps given to learn how to connect HP Envy 4500 wireless printer:

Unpack your HP printer and make sure to switch it on.
Press the wireless button on the control panel of your printer.
Go to the wireless settings menu and click on OK.
Setup wizard window will be displayed, press OK.
The printer will display the available wifi networks in the area once the printer is done searching the surroundings.
Select your desired wifi network from the list displayed.
Press OK after selecting your wireless network.
Enter the password for your wireless network.
A success message will be shown after the printer is connected, press OK.
Your wireless setup is complete

HP Envy 4500 Printer Drivers Download Steps

First, you must specify the operating system on which the HP Envy 4500 All-in-One printer is going to be installed.

There are two methods through which you can complete your HP Envy printer driver installation:

Method 1: Install HP Envy 4500 Drivers with a CD

Turn on your computer & HP Envy printer.
Insert HP Envy 4500 driver setup CD into its CD drive.
Run the CD configuration wizard and follow the onscreen instructions.
You’ll then be prompted to connect the HP Envy 4500 USB cable to your device after a few steps of installation.
Connect the USB cable in place.
The printer connection is detected automatically.
Now, please follow the download instructions displayed onscreen.

Method 2: Install HP Envy 4500 Drivers without a CD

Switch on the HP Envy printer and computer.
Makes sure to keep the USB cable unplugged from your printer.
Download the setup file of the HP Envy 4500 printer driver from the official HP website.
Then run the downloaded file.
Start the CD configuration wizard and follow the instructions on the screen.
You will be prompted to connect the HP Envy 4500 USB printer cable to your device after a few steps of installation.
Connect your USB cable once asked.
The printer connection is detected automatically.
Now, follow the instructions onscreen to complete to download.

Download & Install HP Envy 4500 Printer Ink

Follow the steps given below to complete installation of your HP Envy 4500 Printer Ink:

Switch on your HP Envy printer
Open the front access door of the HP Envy printer.
The carriage will pass towards the right side of the printer.
Before you continue, wait till the carriage is quiet and idle.
Push the ink cartridge gently and open it, and remove the ink cartridge from the slot.
Take out the new ink cartridges from its packaging.
Remove all the protective tape carefully.
Hold the ink cartridge towards the printer on the side and push the ink cartridge into the right slot.
Slide in the cartridge into the empty slot with an upward angle, and then move the cartridge into place.
Shut the door to the front access.

HP Envy 4500 Printer troubleshooting:

Follow these methods given below for various errors or issues occurring with your HP Envy 4500 printer and perform the HP Envy 4500 printer troubleshooting accordingly.

Error message:

Error messages can appear due to the cartridge; there may be many reasons for this, such as installing the incorrect cartridge or incompatible with the unit. Compatibility Errors or Ink Cartridge Errors, on the other hand, can be corrected by following the troubleshooting or prevention measures mentioned below.

Softly scrub the pieces with a free cloth to remove any debris or scum.
Shut down the printer and unplug all cables from the wall socket, then wait a few seconds for the computer to turn off entirely before reinstalling the cartridge.
Since dust or debris can obstruct the printing process, the cartridge portion demands special attention and a clean environment.

Paper Jam error:

To resolve the paper jam problem in the HP Envy 4500, follow the measures outlined below. Now it’s time to troubleshoot the HP Envy 4500 using the steps below.

To troubleshoot, start the HP envy 4500 printers.

Place the ink cartridges in the containers with precision.
Raise the scanner now.
Remove the ink cartridges from the box and inspect the papers inside.
Check the print heads as well and printer rollers.
If you come across some dirt or broken file, gently remove it.
Remove the papers from the tray by opening them.
Be sure no document is ripped or spoiled before re-inserting it.
Avoid squeezing the edge guides too much.
Close the input tray and adjust the edge guides as required.

Wireless connection error:

When it fails to connect to the computer, it is said to have a wireless communication problem. If your HP Envy 4500 printer offline error occurs, there may be many reasons for this issue, but you can resolve it by reconnecting your HP printer to the wireless network.

Here are some steps that will assist you in resolving this problem:

Link your router to the active wireless network if it is not already connected.
Use the WPA password to link your device and printer to the same wireless network.
When your computer asks for a connection mode, choose a wireless network connection.

Printer driver issue:

Problems with HP Envy 4500 drivers are a normal occurrence in almost any printer. It happens because of out-of-date drivers, the failure of the operating system to upgrade the software, and other reliability problems. Go to Configuration and then Device Manager, or go to Windows Notification Center to locate the most recent update.

Frequently Asked Questions:

Why is my HP Envy 4500 not printing?

First, make sure the default printer settings aren’t set to either print in black and white or gray scale. If that doesn’t solve the problem, consider removing and reinstalling the HP Envy 4500 driver. The driver is the program that controls how your printer works.

How do I reset my HP Envy 4500 printer?

To reset the HP Envy printer, follow these simple steps:

Click the power button on the control panel to turn off the HP Envy 4500 printer.
Remove the power cord from the rear port and the printer’s power source.
Wait a few moments.
Remove the surge protector and reconnect the power cable.
You can now turn on the HP Envy 4500 printer.
For a brief second, press and hold the resume button.
When the Attention light goes out, release the trigger.
Your printer’s blinking and ready warning light signals that the factory settings have been restored.

How do I fix HP Envy 4500 Printer offline error?

To tackle the HP Envy 4500 printer offline problem, you can try to power off and restart your computer, and if your computer needs an update, make sure to update it. You can also try to reset the router, and if any issue lies with the Wifi on, plugging your router could solve the problem. Try clearing out the print queue since, with too many print requests, your document scan ends up jamming and will prevent your printer from functioning properly.

How do I install HP Envy 4500 without CD?

To learn how to install HP Envy 4500 printer without CD, follow the steps given below:

Switch on the HP Envy printer and computer.
Makes sure to keep the USB cable unplugged from your printer.
Download the setup file of the HP Envy 4500 driver from the official HP website.
Then run the downloaded file.
Start the CD configuration wizard and follow the instructions on the screen.
You will be prompted to connect the HP Envy 4500 USB printer cable to your device after a few steps of installation.
Connect your USB cable once asked.
The printer connection is detected automatically.
Now, follow the instructions onscreen to complete to download.