HP Envy 7640 Wireless Printer Setup on MAC And Windows 10

The HP ENVY 7640 wireless printer provides the simplest way to print from your smartphone or tablet. This HP Envy 7640 e-all-in-one printer is fully prepared to handle all of your printing and creative endeavors. You can print 4×6 and 5×7″ images from mobile devices without switching paper, thanks to the unique picture paper tray. With HP Envy 7640 printer, Printing from your smartphone, tablet, or PC is simple and quick. Create borderless, lab-quality photographs with ease and complete creative projects and documents. The 25-page automatic document feeder and automated two-sided printing let you manage many documents rapidly. Learn how to set up your HP Envy 7640 printer and complete your ink and driver installation with this HP Envy 7640 Wireless Printer Manual.

Handy Manual Guide on HP Envy 7640 Printer Setup

Users must first finish the HP Envy 7640 Setup before using the printer. However, connecting your HP Envy 7640 printer to your computer might be difficult at times. All necessary advice for manually setting the HP Envy 7640 Wireless Setup may be found in the HP Envy 7640 E-All-In-One Printer Manual. These instructions will mainly guide the HP Envy 7640 Wireless Setup process. The user must attentively read the HP Envy 7640 manual in order to complete the HP Envy 7640 Printer Setup procedure promptly.

Hp Envy 7640 Ink Installation and Replacement

Follow the steps given below to complete the installation of your HP Envy 7640 Printer Ink:

Switch on your HP Envy 7640 printer
Lift the front access door of your HP Envy printer.
The carriage will move towards the right side of your printer.
Before continuing, wait till the printer carriage is quiet and idle.
Pull the ink cartridge gently and take out the ink cartridge from the slot.
Take out the new ink cartridges from the packaging.
Remove the protective tape from the HP Envy 7640 printer ink cartridges carefully.
Place the HP Envy 7640 ink cartridge towards the printer on the side and push the ink cartridge into the slot.
Slide the cartridge into the slot at an upward angle and then place the cartridge into place.
Shut the front access door of your printer.

HP Envy 7640 Printer Wireless Setup on Mac

Follow the steps given below to connect your HP Envy 7640 Printer to WIFI on Mac:

Make sure that your Mac and HP Envy 7640 printer are switched on.
Click the Wireless icon on your printer’s control panel.
Choose the settings to option from the main menu.
Click on the Wireless Setup Wizard and find your preferred wireless network.
Now, from the list of available networks, select your desired wireless network.
Make sure that the printer and your Mac device are connected to the same network.
Enter the password for your wireless network.
Wait till the connection is authenticated and verified.
Print out a test print page.

HP Envy 7640 Printer Wireless Setup on Windows

Follow the steps given below to connect your HP Envy 7640 wireless printer to Wifi on a Windows desktop:

Verify that your Windows device and printing system are both turned on.
Use the CD or download the HP Envy 7640 printer driver from HP’s official website.
To finish the installation, run the downloaded driver.
Type “Control Panel” into the Windows menu search box.
Select the “Device and Printer” option after the control panel window has opened.
Select “Add Printer” from the drop-down menu.
Then, from the list that appears, locate your HP Envy printer.
Choose to Add a Wireless Printer Network from the drop-down menu.
Make sure the WLAN function is turned on.
Press next to begin installing the driver.
After you’ve downloaded the driver, you’ll need to connect your printer to an open WiFi network.
Make sure your Windows device is connected to the same wireless network.
The installation of the wireless Windows HP Envy 7640 is now complete.

HP Envy 7640 Printer Driver Download Steps:

To complete the HP Envy 7640 Printer Driver download, follow the step given below. There are two methods through which you can complete your HP Envy printer drivers installation:

Method 1: Use a CD to install HP Envy 7640 drivers.

Make sure your PC and HP Envy printer are both turned on.
In the CD drive of your HP Envy 7640, insert the HP Envy 7640 driver setup CD.
Start the CD setup wizard and follow the directions on the screen.
After a few stages of installation, you’ll be requested to connect the HP Envy 7640 USB cord to your device.
Securely connect the USB cord.
The printer connection is immediately identified.
Now, kindly follow the on-screen download instructions.

Method 2: Without a CD

Turn on the HP Envy printer as well as the PC.
Make sure that your printer’s USB cord is disconnected.
From the official HP website, download the HP Envy 7640 driver setup file.
After that, open the downloaded file.
Run the setup wizard and follow the on-screen directions.
After a few stages of installation, you’ll be requested to connect the HP Envy 7640 USB printer cord to your device.
When prompted, connect your USB cord.
The printer connection is immediately identified.
Now, to finish the download, follow the on-screen instructions.

How to Perform HP Envy 7640 Wifi Setup Hassle-Freely?

To complete the HP Envy 7640 printer setup and learn how to connect to HP Envy 7640 Wireless Printer, follow the steps given below:

Make sure your HP printer is turned on after unpacking it.
On your printer’s control panel, press the wireless button.
Select OK from the Wifi settings menu.
When the Setup Wizard window appears, click OK.
Once the printer has finished searching the area, it will list the accessible Wifi networks in the region.
From the list of available Wifi networks, choose the one you want.
After selecting your WiFi network, press OK.
Enter your Wifi network’s password.
When the printer is connected, a success message will appear; hit OK.
You’ve completed your WiFi setup.

How To Connect HP Envy 7640 Printer To Wifi?

To connect your Hp Envy 7640 printer to Wifi, follow the steps given below:

Once you have completed the HP envy 7640 Wifi setup, gather all the necessary network credentials of your wireless router.
Click on the WiFi icon on the Control Panel of your printer and tap on the Settings option.
Select the wireless settings option.
After selecting wireless settings, click on the wireless set up wizard.
Enter all the network credentials of your router, such as network name and password.
Establish and verify the connection.

Stepwise Instructions on HP Envy 7640 Hardware And Software Setup

To complete the HP Envy 7640 hardware and software setup, follow the steps given below:

Remove the printer from the case.
Remove all tape and packaging materials from the outside of the printer.
Remove the tape from the printer.
Close the HP Envy 7640 cartridge door.
Plug the printer into an outlet, turn it on, and then configure the settings.
Plug the printer’s power cord into a socket and attach it to the rear of the printer.
Press the Power button to turn on the printer.
On the printer control screen, select your preferred language, then Yes.
After selecting your country/region, tap Yes.
Place A4 paper in the input tray.
Return the tray to its original position after sliding the paper width guidelines in until they rest against the paper’s sides.
Open the HP Envy 7640 cartridge access door to have access to the HP Envy 7640 cartridges.
After putting the HP Envy 7640 ink cartridge into its slot, press down on it until it snaps into position.
On the home screen, click the Setup option, then Tools.
Then hit the Down Arrow, followed by Align Printer.
After raising the printer’s lid, place the orientation page print side down in the right front corner of the scanner glass.
Aligning the alignment sheet with the scanner glass
Go to the official HP Website and download the appropriate Printer driver.
Run the printer driver set up file.
Follow the instructions on the screen to complete the installation.

HP Envy 7640 Troubleshooting

Follow the methods given below to complete the HP Envy 7640 Printer Troubleshooting:

Paper Jams:

Press the power button to turn off the printer, then lift the lid protecting the ink cartridges.
A lever is located between the rear and center of the printer, near the ink cartridges.
To remove the paper path cover, lift this lever.
Examine the paper route for blocked pages once it has been removed.
If there is any paper around, grab it with both hands and pull it towards you. If the problem persists, a paper may have been stuck around the input tray.
Slowly and fully extend the input tray.
Then, flip the printer on its side gently.
Examine the space where the input tray used to be.
Any paper in the slot must be held firmly and dragged toward you.
Return the printer to its appropriate upright position and push the input tray back to its original position when done.

Outdated printer driver:

Update the driver by visiting the manufacturer’s website, then downloading and installing the appropriate driver for your printer model and operating system. The operating system may be discovered by clicking the “settings” tab from the start icon on your computer.

Carriage jams:

To realign the carriage, start by pushing the power button on your printer to turn it off.
Disconnect the power cord at the printer’s rear if clicking the power button does not turn it off. Reconnect the power cord and push the power button to turn the printer back on after around 1 minute.
Then try printing a diagnostic report.
Select the setup icon, scroll down and select reports, and then click on print status report.
If the printer can print this page, the problem has been resolved.

Frequently Asked Questions:

Why Is My HP Envy 7640 Not Printing?

Follow the troubleshooting methods given below to fix HP Envy 7640 not printing error:

Check the movement of the carriage by opening the carriage access door. If this doesn’t work, replace the carriage. Replace the cartridge if there are any leaks. Open the input and output trays, use a flashlight to look for any trapped paper fragments, and remove them. Ensure your printer’s default settings aren’t configured to print in black and white or grayscale exclusively. If it doesn’t solve the problem, consider removing and reinstalling the HP Envy 4500 driver.

How Do I Reset My HP Envy 7640 Printer?

To reset your HP Envy 7640 printer, follow the steps given below:

Remove the line from the power connection and turn on the HP printer to disconnect it from the power source.
Remove the USB cable that connects the HP printer to the PC at this point.
Hold on for a few minutes later. After that, press and hold the HP printer’s power button for a minute.
Insert the power line into the socket, then the printer a short time afterward.
Turn on the printer and press down on the power button for a long time for it to start up. When the printer is turned on, quickly proceed to display the HP printer programming.

How Do I Fix HP Envy 7640 Printer Offline Error?

To fix the HP Envy 7640 Printer Offline error, follow the steps given below:

Select the printer from the “Settings” menu, then “Printers.”
Choose “Properties” from the menu when you right-click on the printer.
Look for the driver button under the “General” or “Details” tab, choose it, and choose the driver again.
It’s also possible that you’ll need to download the driver from the printer’s manufacturer’s website.
Install the printer again.

How Do I Install HP Envy 7640 Without CD?

To install your HP Envy 7640 printer without CD, follow the steps given below:

Turn on the HP Envy printer as well as the PC.
Make sure that your printer’s USB cord is disconnected.
From the official HP website, download the HP Envy 7640 driver setup file.
After that, open the downloaded file.
Run the CD setup wizard and follow the on-screen directions.
After a few stages of installation, you’ll be requested to connect the HP Envy 7640 USB printer cord to your device.
When prompted, connect your USB cord.
The printer connection is immediately identified.
Now, to finish the download, follow the on-screen instructions.

Related Stories to Read :

HP Envy 5540 Wireless Setup
HP Envy 5530 printer setup
HP Envy 6055 Wireless Setup