HP Envy 5014 Troubleshooting and Wireless Setup on mac and Windows

In less than a minute, you can set up your HP Envy 5014 wifi and start printing. With constant performance from dual-band wifi Scan on the go, you can be confident in your connection. With the HP Smart app, you can print from social media and the cloud, as well as simply order ink. Quite easily, you can print from a wide range of smartphones and tablets with the help of your HP Envy 5014 e-all-in-one printer. Create professional-looking borderless pictures and flyers from the comfort of your own home with the HP Envy e- all-in- one 5014 printer. Learn how to set up your HP Envy 5014 printer and complete your ink and driver installation with this HP Envy 5014 Wireless Printer Manual.

Hp Envy 5014 Printer Manual Guide:

Users must first complete the HP Envy 5014 Setup before using the printer. However, connecting your HP Envy 5014 printer to your computer can be challenging at times. Users may find all necessary advice for manually setting the HP Envy 5014 Wireless Setup in the HP Envy 5014 E-All-In-One Printer Manual. These instructions will mainly guide the HP Envy 5014 Wireless Setup process. The user must carefully read the HP Envy 5014 manual to complete the HP Envy 5014 Printer Setup procedure.

HP Envy 5014 Ink Installation and Replacement:

Follow the steps given below to complete the installation of your HP Envy 5014 Printer Ink:

If the printer is not already turned on, press the Power button to switch it on.
Remove the scanner’s cover.
To gain access to the cartridges, open the cartridge access door.
The carriage moves forward to the cartridge access point. Before going, wait until the carriage is idle and silent.
To remove the cartridge, pull the cartridge slot cover and gently push it back until it stops.
To remove the cartridge, pull it up from the slot.
Pull the pull button to release the plastic tape after removing the fresh cartridge from its container.
Place the cartridge in the empty slot, holding it at an upward angle with the cartridge connectors towards the printer’s rear.
Install the remaining cartridge by repeating the previous steps if necessary.
Block access to the cartridges by closing the door.
Shut the scanner’s lid.
To begin the cartridge alignment, follow the directions on the control panel.

HP Envy 5014 Printer Wireless Setup on Mac

To connect your HP Envy 5014 Printer to wifi on a Mac, follow the steps below:

Make sure that both your Mac and your HP Envy 5014 printer are turned on.
Select the Wireless icon from the printer’s control panel.
Select the settings to option from the printer’s main menu.
Select Wireless Setup Wizard from the drop-down menu and type the name of your selected wireless network.
From the list of available networks, choose your favorite wireless network.
Check to see if your printer and Mac are both on the same network.
Enter the password for your wifi network.
Wait for the connection to be confirmed.
Print a practice page.

Hp Envy 5014 Printer Wireless on Windows

Follow the steps given below to connect your HP Envy 5014 wireless printer to wifi on a Windows desktop:

Make sure your HP Envy 5014 printer and your Windows device are both turned on.
Download the HP Envy 5014 printer driver or use the Setup file from the official HP website.
Run the downloaded driver file to finish the installation.
In the Windows menu search box, type “Control Panel.”
On the control panel window, select “Device & Printer.”
From the drop-down option, choose “Add Printer.”
Locate your HP Envy printer in the list that appears.
From the drop-down menu, choose to Add a Wireless Printer Network.
Make sure your printer’s WLAN function is turned on.
Select Next to begin the driver installation.
After you’ve downloaded the driver, you’ll need to connect your printer to a wireless network.
Ensure that your Windows device is on the same wireless network as your Mac.
The wireless Windows HP Envy 5014 installation is now complete.

Hp Envy 5014 Printer Driver Download Steps

To complete the Hp Envy 5014 Printer Driver download, follow the step given below. There are two methods through which you can complete your HP Envy printer drivers installation:

Method 1: Use a CD to install HP Envy 5014 drivers.

Turn on both your PC and your HP Envy printer.
Insert the HP Envy 5014 driver setup CD into the CD drive of your HP Envy 5014.
Run the CD setup wizard and follow the on-screen instructions.
You’ll be asked to connect the HP Envy 5014 USB wire to your device after a few stages of installation.
Connect your printer to the USB cable.
The printer connection will be detected right away.
Now, follow the download instructions on the screen.

Method 2: without a CD, install the printer driver

Turn on both the HP Envy 5014 printer and your computer.
Make sure your printer’s USB wire is unplugged.
Install the HP Envy 5014 driver setup file from the official HP website.
Open the downloaded driver file once it has finished downloading.
Launch the setup wizard and follow the instructions on the screen.
You’ll be asked to connect the HP Envy 5014 USB printer cord to your device after a few stages of installation.
Connect your USB cord when prompted.
The printer connection will be detected right away.
Follow the on-screen directions to finish the download.

HP Envy 5014 wifi Setup

To complete the HP Envy 5014 printer setup and learn how to connect to HP Envy 5014 Wireless Printer, follow the steps given below:

Remove the printer from the packaging.
To remove the package, follow the HP Envy 5014 setup instructions.
Connect the printer’s power cord, switch it on, and install the print cartridges. Allow the printer to complete its initialization process, which includes printing an alignment page.
The WPS pushbutton mode must be supported by both your printer and wireless router. Consult your printer’s and wireless router’s manuals.
A physical WPS push button must be present on the wireless router.
WPA or WPA2 security must be used on your network. If WEP or security is not utilized, most WPS wireless routers will not connect using the WPS method.
If you utilize the manufacturer’s default settings for the network name and security, most WPS wireless routers will not connect using the WPS technique.
Start the WPS pushbutton mode on your printer to connect your wireless printer to your wireless router using WPS.
Consult your printer’s manual for details on how to activate WPS.
Press the WPS button on your router within 2 minutes

How to Connect HP Envy 5014 Printer To WIFI

To connect your Hp Envy 5014 printer setup to WIFI, follow the steps given below:

Once you’ve finished unpacking your HP printer, make sure it’s switched on.
Press the wifi button on the printer’s control panel.
From the wifi settings menu, select OK.
Click OK when the Setup Wizard window displays.
When the printer has finished searching the area, it will list the available wifi networks.
Choose your desired wireless network from the list of available networks.
After you’ve chosen your wifi network, click OK.
Enter the password for your wifi network.
A success message will appear once the printer is connected; click OK.
You’ve finished configuring your wireless network.

HP Envy 5014 Hardware and Software Setup

To complete the HP Envy 5014 hardware and software setup, follow the steps given below:

Take the printer out of its package.
Remove the printer’s protective tape and packaging materials.
Take off the printer’s protective tape.
Close the cartridge door on the HP Envy 5014.
Turn on the printer after plugging it in, and then customize the settings.
To turn on the printer, press the Power button.
Select your desired language on the printer control screen, then Yes.
Click Yes after selecting your country/region.
In the input tray, place A4 paper.
To access the HP Envy 5014 cartridges, open the HP Envy 5014 cartridge access door.
Place the HP Envy 5014 ink cartridge in the slot and press down until it snaps into place.
Go to the home screen, select Setup, and then Tools.
After that, click the Down Arrow and go to Align Printer.
Place the orientation page print side down in the right front corner of the scanner glass after raising the printer’s lid.
Go to the HP official website and download the correct printer driver.
Open the printer driver installation file.
To finish the installation, follow the on-screen directions.

HP Envy 5014 Troubleshooting

Follow the methods given below to complete the HP Envy 5014 Printer Troubleshooting:

Error During Network Installation on HP Envy 5014:

When you try to install the whole printer software on a wireless network, you get this problem. To resolve network connection troubles, restart the computer, router, and printer. Remove the program and reinstall hp printer software if the HP printer did not install properly.

Color or black-and-white printing with the HP Envy 5014:

Select the Paper tab after selecting your printer from the device list. To get a color or black-and-white print, you must first choose the ink cartridge color. Select the Advanced option, then Print in Grayscale and Black Ink Only from the drop-down menu.

Network driver setup, the Envy 5014 printer was not found:

Try restarting your printer, computer, and PC if your 5014 printer displays this problem message. Check the printer and network status after that. You can use the HP Envy 5014 Print and Scan Doctor. Reinstall the HP software after removing it from the PC.

Copies of the HP Envy 5014 are blank or faded:

Examine the ink or toner cartridge’s ink level. Then, see whether you can print a diagnostic page. To find out what’s causing the problem, go to the diagnostic page. The diagnostic page will assist you in determining which cartridge is causing the issue.

Frequently Asked Questions

Why Is My HP Envy 5014 Not Printing?

The issue of a printer that refuses to print is a common one among HP printer users. Connectivity issues, as well as malfunctioning setups or drivers, can all contribute to this issue. Use the tactics given below if you’re having problems finding a solution. They can aid you in addressing the problem with your HP printer, not printing.

Perform a basic troubleshooting procedure.
Download and install the most up-to-date printer driver.
Set your printer as your default.
End all print jobs.
Check the status of the printer.

How Do I Reset My HP Envy 5014 Printer?

To reset your HP Envy 5014 printer, follow the steps below:

Turn on the HP printer after disconnecting it from the power source by withdrawing the line from the power connection.
Disconnect the USB cable that connects the HP printer to the PC at this stage.
After that, press and hold the HP printer’s power button for a minute.
Connect the power line first, then the printer after a few seconds.
Turn on the printer and press and hold the power button for a long time to start it. Go straight to the HP printer configuration screen after turning on the printer.

How Do I Fix HP Envy 5014 Printer Offline Error?

Turn off your printer and wait around 10 seconds before removing the power cord to repair the HP Envy 4520 Printer Offline problem. Turn off the computer you’re using for 10 seconds. After that, connect the printer’s power cord and turn it on.

How Do I Install HP Envy 5014 Without CD?

To install the HP Envy 5014 printer without CD, follow the steps given below:

Turn on both the HP Envy 5014 printer and your computer.
Make sure your printer’s USB wire is unplugged.
Install the HP Envy 5014 driver setup file from the official HP website.
Open the downloaded driver file once it has finished downloading.
Launch the setup wizard and follow the instructions on the screen.
You’ll be asked to connect the HP Envy 5014 USB printer cord to your device after a few stages of installation.
Connect your USB cord when prompted.
The printer connection will be detected right away.
Follow the on-screen directions to finish the download.

Related Stories to Read :

HP Envy 4500 printer driver
HP Envy 4520 Printer Driver download
HP Envy 5000 Wireless Setup